Overview of  API-5CT J55 Casing Pipe

API-5CT J55 casing Pipe 6-5/8 Inch Range 2 Oiled – Derbo The API-5CT J55 Casing Pipe is a type of Steel Pipe that is commonly used in the Oil and Gas industry. It is made from high-quality steel and is designed to withstand high pressure and extreme temperatures. This particular casing pipe has a Diameter of 6-5/8 inches and a Length of Range 2, which means it can be used in a variety of applications. One of the key features of the API-5CT J55 Casing Pipe is its oiled finish. This finish provides a protective layer that helps to prevent corrosion and extends the lifespan of the pipe. The oiled finish also makes the pipe easier to handle and install, as it reduces friction and allows for Smoother Connections. In addition to its oiled finish, the API-5CT J55 Casing Pipe is also known for its High strength and durability. It is made from high-quality steel that is carefully tested and inspected to ensure it meets the strict standards set by the American Petroleum Institute (API). This ensures that the pipe can withstand the harsh conditions of the oil and gas industry, including high pressure, extreme temperatures, and corrosive substances. The API-5CT J55 Casing Pipe is also designed to be highly resistant to corrosion. This is important in the oil and gas industry, as corrosion can cause leaks and other damage to the pipe, leading to costly Repairs and downtime. The oiled finish helps to protect the pipe from corrosion, while the high-quality steel used in its Construction provides additional resistance. Another advantage of the API-5CT J55 Casing Pipe is its versatility. It can be used in a wide range of applications, including oil and gas exploration, drilling, and production. Its 6-5/8 inch diameter and Range 2 length make it suitable for a variety of well depths and drilling conditions. It can also be easily connected to other Pipes and equipment, thanks to its standardized dimensions and Threaded connections.

Labels a							Calculated Mass c
			Nominal Linear Mass T& C b,c	Wall Thick- ness				em, Mass Gain or Loss Due to End Finishing d
		Outside Diameter			Inside Diameter	Drift Diameter	Plain- end	kg
								Round Thread		Buttress Thread
							wpe
		D	kg/m	t	D	mm	kg/m	Short	Long	RC	SCC
		mm		mm	mm
1	2	3	4	5	6	7	8	9	10	11	12
13 3/8	48	339.72	71.43	8.38	322.96	318.99	68.48	15.04	—	— 17.91	—
13 3/8	54.5	339.72	81.1	9.65	320.42	316.45	78.55	13.88	—	16.44	—
13 3/8	61	339.72	90.78	10.92	317.88	313.91	88.55	12.74	—	14.97	—
13 3/8	68	339.72	101.19	12.19	315.34	311.37	98.46	11.61	—	14.97	—
13 3/8	68	339.72	101.19	12.19	315.34	311.37	98.46	11.67 f	—	14.33	—
13 3/8	72	339.72	107.15	13.06	313.6	311.15 e	105.21	10.98	—	13.98	—
13 3/8	72	339.72	107.15	13.06	313.6	311.15 e 309.63 309.63	105.21	10.91 f	—	14.33	—
13 3/8	72	339.72	107.15	13.06	313.6		105.21	10.98	—	13.98	—
13 3/8	72	339.72	107.15	13.06	313.6		105.21	10.91 e	—		—
16	65	406.4	96.73	9.53	387.4	382.57	96.73	18.59	—	— 20.13	—
16	75	406.4	111.61	11.13	384.1	379.37	108.49	16.66	—	18.11	—
16	84	406.4	125.01	12.57	381.3	376.48	122.09	14.92	—	—	—
16	109	406.4	162.21	16.66	373.1	368.3	160.13	—	—		—
18 5/8	87.5	473.08	130.21	11.05	450.98	446.22	125.91	33.6	—	39.25	—
20	94	508	139.89	11.13	485.7	480.97	136.38	20.5	27.11	24.78	—
20	94	508	139.89	11.13	485.7	480.97	136.38	20.61	27.26 g 24.27 17.84	24.78	—
20	106.5	508	158.49	12.7	482.6	477.82	155.13	18.22		22	—
20	133	508	197.93	16.13	475.7	470.97	195.66	13.03		16.02	—
NOTE See also Figures D.1, D.2, and D.3.
a Labels are for information and assistance in ordering.
b Nominal linear masses, threaded and coupled (Column 4) are shown for information only.
c The densities of martensitic chromium steels (l80 Types 9Cr and 13Cr) are less than tHose of Carbon steels; The masses shown are therefore not accurate for martensitic chromium steels; A mass correction factor of 0.989 shall be used.
d Mass gain or loss due to end finishing; See 8.5.
e Drift diameter for most common bit size; This drift diameter shall be specified in the purchase agreement and marked on the pipe; See 8.10 for drift requirements.
f Based on 758 mPa minimum yield strength or greater.
g Based on 379 mPa minimum yield strength.

When it comes to purchasing the API-5CT J55 casing pipe, it is important to choose a reputable Supplier like Derbo. Derbo is a leading supplier of steel pipes and fittings, with a strong reputation for quality and reliability. They offer a wide range of products, including the API-5CT J55 Casing Pipe, and can provide expert advice and support to help you find the right pipe for your specific needs.

casing pipe china good Factory,Oil Tube wholesale–Price High-Quality good chinese,casing pipe Chinese high-quality factory,In conclusion, the API-5CT J55 Casing Pipe is a high-quality steel pipe that is widely used in the oil and gas industry. It is known for its oiled finish, high strength, durability, and resistance to corrosion. Its versatility and standardized dimensions make it suitable for a variety of applications, and choosing a reputable supplier like Derbo ensures you get a reliable and high-quality product. Whether you are involved in oil and gas exploration, drilling, or production, the API-5CT J55 Casing Pipe is an excellent choice.