{"id":1194,"date":"2022-03-07T21:03:39","date_gmt":"2022-03-07T13:03:39","guid":{"rendered":"https:\/\/startertemplatecloud.com\/g38\/?post_type=product&p=1194"},"modified":"2024-11-14T17:15:00","modified_gmt":"2024-11-14T09:15:00","slug":"j55-tubing","status":"publish","type":"product","link":"https:\/\/www.casingtube.com\/ru\/j55-tubing\/","title":{"rendered":"J55 Tubing"},"content":{"rendered":"

Tubing<\/strong><\/a><\/strong><\/a> is the conduit used to transport crude Oil<\/strong><\/a><\/strong><\/a> or natural Gas<\/strong><\/a><\/strong><\/a> from the producing formations to the field surface facilities for process<\/strong><\/a>ing after drilling is completed. During the extraction process, the octg tubing<\/strong><\/a> must withstand the pressure and it must be adequately strong to resist loads and deformations associated with production<\/strong><\/a> and workovers. In addition, tubing generally is sized to satisfy the expected rates of production of Oil and Gas<\/strong><\/a>. That is because if tubing is too large, we will have an economic impact beyond the cost of tubing oil<\/strong><\/a> and gas<\/strong><\/a> itself, however, if \u00a0API<\/strong> tubing is too small, it will restrict the production of oil or gas, and if things contiNue<\/strong><\/a> this way it will impact subsequent economic performance of the well. Generally, tubing is manufactured in the same way as Casing<\/strong><\/a><\/strong><\/a>, except an additional process known as \u201cupsetting\u201d which is applied to thicken the Pipe<\/strong><\/a><\/strong><\/a>s<\/strong><\/a><\/strong><\/a>.<\/p>\n

Outside Diameter<\/strong><\/a> of tubing is from 1.660\u201d to 4 1\/2\u201d (42.16mm to 114.3mm); Wall thickness<\/strong><\/a> is from 2.3 PPF to 26.10 PPF (3.57mm to 9.52mm). Based on the standard of api 5c<\/strong><\/a>t<\/strong><\/a><\/strong><\/a>, ISO11960, GOST, and their Steel<\/strong><\/a> grade<\/strong><\/a> are from H40, J55<\/strong><\/a>, N80<\/strong><\/a>, N80Q, l80<\/strong><\/a><\/strong><\/a>, L80-1, L80-9Cr, L80-13Cr, P110<\/strong><\/a> etc. As you know the Length<\/strong><\/a> range is R1 (6.10-7.32M), R2 (8.53-9.75M), R3 (11.58-12.8M), R2 is used frequently. Besides EU and NU end type could be provided by Anson, IJ and premiums Thread<\/strong><\/a> type are also available.<\/p>\n

 <\/p>\n

Specifications of OCTG tubing<\/b><\/strong><\/h3>\n

Dimension range (OD inch):<\/strong>\u00a01-1\/2\u201d—-4 1\/2\u201d
\nDimension range (OD mm):<\/strong>\u00a026.67—-114.3
\nType of upset:\u00a0<\/strong>NUE, Eue<\/strong><\/a>, Plain end.
\nStandard:<\/strong>\u00a0API Spec 5CT<\/strong><\/a><\/strong><\/a>
\nMain Steel Grade:<\/strong>\u00a0H40, J55, N80, N80Q, L80, L80-1, L80-9Cr, L80-13Cr, P110 etc.
\nType of Casing\uff1a<\/strong><\/p>\n